Designed for the recovery of metal chips and shavings mixed with oil. Can be used for both aqueous and synthetic-based coolants
The HOGOIL’s compact size allows it to be quickly moved near and around machinery to facilitate machinery maintenance and minimize downtime
Single phase, dual motors – 2-stage heavy-duty bypass type
The electric pump, with a flow rate of 100 liters/min. (26 gallons/min.), is included. It allows recovered liquids to be pumped back into the machinery
Equipped with 3 independent switches (one switch for each motor and a separate switch for the electric pump). There is also an indicator light for when the maximum liquid recovery capacity has been reached
The electronic float valve automatically stops the vacuum when the container is full
There are two filters installed upstream from the motor – a foam filter and a Dralon pre-filter
The 2″ (50 mm) suction inlet is positioned below the filters allowing for the recovery of both liquids and solids at the same time
Metal chips and shavings are collected in the removable sieve basket
The HOGOIL PUMP is also equipped with a polypropylene mesh filter (300 microns) which is used in conjunction with the sieve basket. The mesh filter protects the pump from very fine chips/shavings and it also cleans/filters the oil as it passes through the sieve basket allowing the recovered oil to be re-used
A discharge hose with a nozzle is included for use with the pump. The discharge nozzle is equipped with a ball valve
A 1.25″ drain valve is also installed on the container
Oil-resistant suction hose and a variety of optional accessories are available
